Floor Furnace Facts

Floor Furnace

A floor furnace is an alternative to regular home heating systems. It requires no floor space, electricity or duct-work to function, making it a great option for homeowners wishing to upgrade their older properties that have no ductwork in them. The vast majority of floor furnaces are installed directly underneath the floors of the home where - through the forces of convection – they radiate warm air into and circulate the warm air around the room. They are recommended for use in small or medium-sized homes where space is limited and floor plans are minimal.

A floor furnace works using natural gas or propane to fuel the boiler embodied within the register. Once it is fuelled, water contained within the boiler is heated up and passed through the piping system linked with the unit underneath the floor. Heat generated from the water in these pipes is then transferred into the room to provide a warmer more comfortable temperature. Most floor furnace units come with a wall thermostat that – when mounted in a central location – picks up the average temperature of the room and sends a signal back to the furnace, indicating when to switch it on and off. This helps to regulate the temperature in that particular room so that the room is neither too hot nor too cold and works a lot more efficiently in well insulated environments.

This particular heating system is best placed in a central location for heat to be distributed evenly around the home. Rooms closer to the furnace will receive a lot more warmth than rooms further away so prioritisation of placement is very important. This is much the reason why homes with a larger floor plan do not receive a great deal of benefit from floor furnaces. Maintenance is made easy with the use of floor furnace covers. These come in the form of a grate or grill, which when installed provide easy access to the unit. This can be very useful when needing to perform a furnace repair, replace any floor furnace parts or proceed with a furnace replacement.

Gas Floor FurnaceTraditional home furnaces have become more and more popular over the years and are seen by many homeowners to be a welcome alternative to regular central heating systems. Their distinct feature is that they release heat through vents or grilles which are fixed in a specific spot or position in the home. This placement could be on the wall, in the floor or on the ceiling depending on the users preference.

There are some issues concerning the efficiency of this type of heating system due to the fact that it is installed in a specific position which causes heat to favour spaces closer to the furnace than areas that are further away. Installation can also be tricky if a good enough ventilation system is not already setup in the property, and could contribute further to the problem of inefficiency. A good approach many savvy homeowners take to ensure their home is effectively heated when using a furnace system is to first of all ensure that the furnace system is acquired from a reputable supplier. These stores have technicians who make certain that the furnace is correctly placed and set up in the home as well as advise on the best models offering high efficiency.

Although this form of system is not the most efficient method of home heating around it does go a long way for homeowners in unique circumstances. Before deciding whether or not installation of a floor furnace is right for your home you should always check with local building regulations to confirm that its use is permitted in your area. Comparing furnace prices with different suppliers will help you find the best deals currently on offer.

Related Furnace Articles

 

Like this article? Share it!

Comments
Submit a Comment

Name (required)

Email (required)(not published)

Website